Tile Sealer

£42.20£133.80 inc VAT

*   Amazingly, Protects against both Water & Oil spillages
*   NEW Advanced Resin-Technology, for Strength and Durability
*   Helps Prevent against the worst of Staining
*   Invisible coating – not changing tile colours
*   Low Odour for your peace of mind and Safety
*   Allows Natural Stone to Breathe for Durability
*   Fast and Easy to Use
*   Contains Natural Plant Extracts

Clear

Description

Stain-Gard SB Tile Sealer is the Professional and DIY Perfectionists choice, for Fast and Easy application when sealing/impregnating natural & man-made tiles.     Containing New Advanced Resin-Technology, it forms an Invisible, Strong and Extremely Durable Protective Shield on the surface that Penetrates deep into the stone, to help prevent staining from both water and oil based spills.

Stain-Gard SB Sealer Impregnator will help prevent permanent staining of surfaces by repelling daily spills, dirt and grime, making cleaning and maintenance considerably easier, helping to prevent premature replacement of the tiles.

Stain-Gard SB Sealer Impregnator can be used on terrazzo, travertine, sandstone, limestone, brick sets, York stone, amalgamated stone, slate, un-glazed Ceramic tiles and is particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.

COVERAGE:   Approx. 20-45 sq mtrs per litre (20-50ml per sq mtr) on polished/less absorbant surfaces.   10-20 sq mtrs per litre on absorbant surfaces (50-100 ml per sq metre)

PRODUCT ADVICE:   Ensure under floor heating is turned off and cooled prior to application to prevent premature drying.   Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.

____________________________________________________________________________________

DIRECTIONS FOR USE:   Invert container before use – Use only in a well ventilated area.

The surface to be treated must be clean, free from any residues dust and dirt. If required, use Wax & Residue Remover prior to application

Using a clean dry cloth, applicator, sponge, brush or roller, apply a thin and even coat over the area to be treated, when dry apply a second coat (more absorbent surfaces may require additional coats).

Wait until most of the product has been absorbed and use Stain-Gard SB applied by cloth to remove any excess product; buff up and polish areas with a clean cloth

____________________________________________________________________________________


DRYING TIME:
  May vary from floor to floor; product should be touch dry after 1-3 hours, and fully cured within 24-36 hours

MAINTENANCE:  
After applying Stain-Gard SB and to ensure your floors durability and “new look”, it is vitally important to Clean and Maintain at regular intervals with Professional Care & Maintainer.

TECHNICAL ADVICE:  
For further product advice call free 0800 695 0825

SAFETY PRECAUTIONS:   Ensure adequate ventilation throughout the application and drying process.   Wear appropriate safety gloves, eye protection and respirator when using this product.

“Click here to download your Stain-Gard SB information sheet”

Additional information

WeightN/A
Sizes

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.