Easy to use, Wax and Residue Remover quickly and effectively removes old sealers, wax, polish, coatings, tar, glue, tyre marks, oil, and grease from ceramic, concrete and natural stone floors, including marble, travertine, limestone, sandstone, slate, terracotta, brick sets, and cobblestone.
Wax & Residue Remover Emulsifies grease and oil making it possible to simply wash away with water without using aggressive cleaners or volatile solvents.
PRODUCT ADVICE: Always test product for any adverse reaction prior to application on a spare tile or in a inconspicuous place. Avoid contact with alkaline sensitive surfaces, aluminum, paint and varnished wood. Ensure all areas are thoroughly rinsed with clean fresh water.
Wax Residue Remover
Invert Container Before Use. Use only in well ventilated areas
Dilute 1 part Wax Residue Remover to 5 parts warm water (200ml per litre), apply to the surface and allow to stand for 5-10 minutes, agitate using brush or floor pad in small circular motions and rinse with clean water.
On heavier wax/seal build-ups, dilute 1 part Wax Residue Remover to 1 part warm water. Apply to the surface and allow to stand for 5-10 minutes, agitate using a brush or floor pad in small circular motions and rinse with clean water. Repeat if necessary
Protective gloves should be worn when using this product. Avoid contact with eyes and skin; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water. Use only in well ventilated areas.