Tile & Grout Restorer has been formulated for the restoration of ceramic & porcelain tiles and grout residues. (This product should only be used when alkaline based cleaners have little or no effect.)
Tile & Grout Resorer rapidly breaks down and removes, ground in grease, calcium deposits, grout residues and soap deposits in wet rooms, changing rooms, shower rooms, kitchens and swimming pool surrounds.
Tile & Grout Restorer
DO NOT USE ON ACID SENSITIVE SURFACES SUCH AS MARBLE & LIMESTONE.
Ensure under floor heating is turned off and cooled prior to application to prevent premature drying.
Test product for suitable colour change or enhancement, on a spare tile or in an inconspicuous area.
Invert Container Before Use
Dilute 1 part Tile & Grout Restorer to 10 parts warm water (100ml per litre).
Apply by sponge or spray, leave for a few minutes, agitate and rinse thoroughly, re-apply if necessary.
For stubborn marks and staining, dilute at 1 part Tile & Grout Restorer to 5 parts water (200ml per litre). Leave for 1-2 minutes and rinse with clean water, always rinse thoroughly after use.Gloves should be worn when using this product. Avoid contact withe eyes; Ensure all spills, and non treated areas are thoroughly rinsed with clean fresh water.