Polished marble impregnator is a professional product for impregnating polished marble. It produces an invisible, protective shield within, and helps prevent staining from both water and oil based stains.
Particularly useful in kitchens, utility areas, bathrooms, shower rooms, dining rooms and all other areas where spillages may occur.
Polished Marble Impregnator
Invert container before use.
Ensure the surface to be treated must be clean, free from any residues dust and dirt.
If required, use Wax & Residue Remover prior to application.
Using a clean dry cloth, applicator, sponge, brush or roller, apply a thin, even coat 25-35 ml per litre over the area to be treated.
Once the product is dry, apply a second coat, more absorbent surfaces may require additional coats.
Wait until most of the product has been absorbed, then remove any excess with a clean dry cloth - buff up and polish areas with a clean cloth, removing any residue.
DRYING TIME:
Product should be touch dry after 1-3 hours, and fully cured within 24-36 hours. Do not replace furniture for a minimum of 12 hours after applying.
PRODUCT ADVICE:
Turn off under floor heating and allow floor to cool prior to application. Before use test the product for any colour change in an inconspicuous area.
Use only in a well ventilated areas.
Wear appropriate safety gloves, eye protection and respirator when using this product.
In confined areas where adequate ventilation is not available, respirators or masks must be worn.