Natural Stone Gloss is easy to use, fast drying and provides unbeatable gloss shine to natural stone floorings such as - terrazzo, travertine, sandstone, limestone, brick sets, quarry tiles, unpolished Marble and Granite.
Natural Stone Gloss contains a blend of acrylic resin and co-polymers that add strength, durability and longevity to stone foors.
Please note: Only to be applied after Natural Stone Sealer and Professional Slate Sealer.
Natural Stone Gloss
Approx. 20-30 sq mtrs per litre on stone pre treated with Natural Stone Sealer.
Ensure under floor heating is turned off and cooled prior to application to prevent premature drying. Test product for suitable colour change or enhancement on a spare tile or in an inconspicuous area.
Invert container before use. Ensure the area to be sealed is free from dirt, dust or grime.
Dependent on stone type, apply an even coat 30-50ml per sq metre; 20-30 square metres per litre, using natural pad applicator, sponge, mop or roller.
Allow to dry before applying a second or third coat.
Ensure to apply in opposite directions.
Wipe off any spills. Do not rush the application.
If air bubbles appear, remove by passing your applicator slowly over the areas affected.
For a deeper High Gloss finish, apply a fourth or fifth coat.
May vary from floor to floor; product should be touch dry within 30 to 60 minutes in-between coats, and fully cured within 6-12 hours.
Allow 6-12 hours before standing furniture back on the treated floor.
Protective gloves should be worn when using this product. Avoid contact with eyes. Ensure all spills and non treated areas are thoroughly rinsed with clean fresh water.